Configures communication to a remote system using Modbus on a serial line.

• RemoteConfig
• RemTrans

Optional description.

 Process priority for the transport process. For future use.

 Device name for the serial port, ex /dev/ttyS0.
 Dynamic change is not possible.

 Baud rate for the serial port, ex 9600.
 Dynamic change is not possible.

 Type of parity for the serial port.
 Dynamic change is not possible.

 Number of stop bits for the serial port.
 Dynamic change is not possible.

 Number of data bits for the serial port.
 Dynamic change is not possible.

 Timeout time in seconds used when reading a message from the serial port.
 Dynamic change is possible.

 Attribute that indicates connection with the remote node.
 The link is considered down when we reach the link supervision timeout
 time without receiving any valid message.
 The link is considered up again when receiving a valid message.

 Time in seconds before the link is considered down.
 Dynamic change is possible

 When set, this attribute tells the remote handler not to start
 or restart the process that handles this remote node. If the transport process
 is running while the attribute is set it will terminate.
 Dynamic change is possible.

 This attribute shows how many times the remote handler has restarted the
 transport process that handles this remnode.
 Dynamic change is possible and can be used in order to earn more restarts.

 The restart limit tells the remote handler how many times the transport process
 that handle this remnode can be restarted.
 Dynamic change is possible and can be used in order to earn more restarts.

 The restart time is set by the transport process at startup and therefore
 shows the latest (re)starttime.

 Scantime in seconds for outgoing RemTrans objects.
 Dynamic change is possible.

 Error counter.

 Type of remnode. Used in the RemoteConfig classgraph.

 Contains the objid for the RemTrans objects for this remnode.
 The objid's are inserted by the remote process.